1 2

S&P TD-350/125-T Standard In-Line Fan c/w Timer - Rated @91.6l/s 2 speed

S&P TD-350/125-T Standard In-Line Fan c/w Timer - Rated @91.6l/s 2 speed

SKU : TD-350/125-T

Overview

The S&P TD-350/125 T In-Line Mixed-Flow Fan is designed for use with 125mm circular ducting in residential and light commercial ventilation systems. Delivering an airflow of up to 330m³/h (91.6l/s), its compact, low-profile construction makes it suitable for installation within ceiling voids and other areas where available space is limited.
£129.96 GBP Excl. VAT: £108.30 GBP

Out of Stock
  • For warranty information, please refer to the manufacturer’s warranty policy or contact them directly.
View full details

Description

Product Part Number

TD-350/125-T

Description

The S&P TD-350/125 T In-Line Mixed-Flow Fan is designed for use with 125mm circular ducting in residential and light commercial ventilation systems. Delivering an airflow of up to 330m³/h (91.6l/s), its compact, low-profile construction makes it suitable for installation within ceiling voids and other areas where available space is limited.

An integrated adjustable run-on timer allows the fan to continue operating for a selected period of between 1 and 30 minutes after the connected switch has been turned off. This helps remove remaining moisture, stale air and odours from bathrooms, utility rooms and other ventilated spaces.

The fan is manufactured with a durable polypropylene casing and ABS mixed-flow impeller. Its removable motor and impeller assembly allows servicing and maintenance to be carried out without disconnecting the adjoining ductwork. The motor includes ball bearings and thermal protection for reliable operation.

Technical Specification

Specification Details
Manufacturer Soler & Palau (S&P)
Model TD-350/125 T
Manufacturer reference 5211324800
Fan type In-line mixed-flow duct fan
Nominal duct diameter 125mm
Timer Adjustable run-on timer
Timer range 1–30 minutes
Number of speeds Single speed
Maximum airflow 330m³/h
Maximum airflow 91.6l/s
Motor speed 2,050rpm
Maximum absorbed power 26W
Maximum absorbed current 0.11A
Sound pressure level 33dB(A) at 3 metres
Electrical supply 230V, single phase, 50Hz
Operating air temperature −20°C to +40°C
Protection rating IP44
Electrical protection class Class II
Motor insulation class Class B
Motor bearings Ball bearings, greased for life
Motor protection Safety thermal protection
Casing material Polypropylene
Impeller material ABS
Speed controller compatibility Not suitable for speed control
Weight 2kg
Overall length 258mm
Maximum casing diameter 176mm
Connection spigot diameter 123mm, suitable for 125mm ducting
Mounting Integrated removable support bracket

Frequently Asked Questions

  • What is an extractor fan used for?

    An extractor fan removes humid, stale or polluted air from a room. They are commonly used in bathrooms, kitchens, utility rooms and other areas where moisture, odours or poor airflow can build up.

  • What extractor fan do I need for a bathroom?

    The right bathroom extractor fan depends on the room size, installation location, duct route and control type required. Timer, humidity and low-carbon options are available depending on the project.

  • Can extractor fans help with condensation?

    Yes, extractor fans can help reduce condensation by removing humid air from wet rooms. However, condensation can also be affected by insulation, heating, airflow and overall ventilation.

  • What is a D-MEV fan?

    A D-MEV fan is a decentralised mechanical extract ventilation fan. It usually runs continuously at a low rate, with boost options when more extraction is needed.

  • What is the difference between an extractor fan and an inline fan?

    A standard extractor fan is usually mounted on a wall, window or ceiling. An inline fan is installed within the duct run, often in a loft or ceiling void, and can be useful where a longer duct route is needed.