Vent Matika EKA NI duct heater
Vent Matika EKA NI duct heater
SKU : EKA-NI-PTC-100-0.6 PTC/2NTC
Overview
The Vent Matika EKA NI range of electric duct heaters are Used in ventilation systems as heaters for comfort, or preheaters, to protect the ventilation unit from frost. The EKA NI is controlled by a room mounted set point controllerIn Stock
Couldn't load pickup availability
For warranty information, please refer to the manufacturer’s warranty policy or contact them directly.
- Order before 5pm, Dispatched Tomorrow
Download Files
Description
Vent Matika EKA NI duct heater
The Vent Matika EKA NI range of electric duct heaters is designed for ventilation systems, providing:
✅ Comfort heating 🔥
✅ Pre-heating to protect ventilation units from frost ❄️
Control System: The EKA NI model is controlled via a room-mounted setpoint controller 🎛️.
Why Choose BPC Ventilation?
BPC Ventilation is the largest independent MVHR specialist, offering:
✔️ Lifetime technical support 📞
✔️ High-quality ventilation systems 🏆
🔑 Key Features – Vent Matika EKA NI Heater
Controlled via a room-mounted setpoint controller 🎛️
Internal temperature regulator 🌡️
Dual overheating protection 🚨
Pre-heater or post-heater functionality 🔄
Easy-to-use screw terminals 🔧
Rubber-sealed ductwork connections 🔩
Flexible mounting: Horizontal or Vertical ⬆️⬇️
Stainless steel heating element 🌟
Aluzinc casing for durability 🏗️
Certified: CE, RoHS & REACH 🏅
🎛️ Control Options
The EKA NI features a wall-mounted setpoint controller that connects to a duct-mounted temperature sensor.
⚙️ How it Works:
The heater operates based on the duct sensor
The supply air temperature sensor ensures safe heating within +15°C to +40°C range 🌡️
 |
 |
🔥 Overheating Protection
🛡️ Built-in safety thermostats prevent overheating:
🔸 Automatic Reset: Turns off at 50°C, restarts when below 50°C
🔸 Manual Safety Reset: Turns off at 100°C – requires manual intervention
🛠️ If overheating occurs, identify the cause, fix it, and press the RESET button on the heater’s cover.
🏗️ Construction & Mounting
Material: Aluzinc-coated steel – high-temperature resistant ♨️
Installation:
✅ Indoors only – away from moisture 🚫💧
✅ Mounting:
- Horizontally with the electrical box facing up or sideways
- Vertically (only if airflow is upwards)
📌 Max Output Temperature: 50°C 🌡️
Installation
📏 Available Models & Dimensions
💡 These models are kept in stock, but other sizes and power outputs are available upon request. Contact our team for pricing & availability!
| Model | Diameter | Power Output | Code |
|---|---|---|---|
| 🔹 EKA-NI-100-0.6 | 100mm | 0.6 kW | EKA-NI-100-0.6 |
| 🔹 EKA-NI-125-1.2 | 125mm | 1.2 kW | EKA-NI-125-1.2 |
| 🔹 EKA-NI-160-1.2 | 160mm | 1.2 kW | EKA-NI-160-1.2 |
| 🔹 EKA-NI-160-2.4 | 160mm | 2.4 kW | EKA-NI-160-2.4 |
| 🔹 EKA-NI-200-3.0 | 200mm | 3.0 kW | EKA-NI-200-3.0 |
| 🔹 EKA-NI-250-3.0 | 250mm | 3.0 kW | EKA-NI-250-3.0 |
📞 Need a custom size? Contact us for options!
🛒 Optional Accessories
Enhance the performance of your EKA NI heater with these add-ons:
PTC Airflow Sensor – Ensures heater operation only if airflow velocity ≥ 1.5m/s 🌬️
PS Differential Pressure Switch – Mechanical protection to prevent heating under low airflow 🚨
PTC/PS Sensor – Combines minimum airflow detection & pressure switch for safety
PTC/K Sensor – Includes airflow detection & overheating protection contactor
2NTC Sensors – Dual sensors for accurate air temperature measurement 🌡️
PTC/2NTC Sensor – Combines airflow detection & dual temperature sensors
📌 Note: Due to airflow requirements, PTC or PS options may not be suitable for some domestic MVHR/MEV systems. Contact us for advice!
📞 Order Now & Upgrade Your Ventilation System!
