S&P TD-500/150-160 SILENT In-Line Fan

SKU : TD-500/150-160 SILENT

Overview

The S&P TD-500/150-160 SILENT In-Line Fan is an ultra-quiet mixed-flow duct fan designed for residential and light commercial ventilation systems. It can be connected to either 150mm or 160mm circular ducting, with an additional rubber gasket supplied for 160mm installations. Its low-profile construction makes it suitable for ceiling voids and other confined installation areas.

£188.75 GBP Excl. VAT: £157.29 GBP

For warranty information, please refer to the manufacturer’s warranty policy or contact them directly.

Any questions? Reach out to our team

View full details

Description

Product Part Number

TD-500/150-160 SILENT

Description

The S&P TD-500/150-160 SILENT In-Line Fan is an ultra-quiet mixed-flow duct fan designed for residential and light commercial ventilation systems. It can be connected to either 150mm or 160mm circular ducting, with an additional rubber gasket supplied for 160mm installations. Its low-profile construction makes it suitable for ceiling voids and other confined installation areas.

The three-speed motor provides airflow rates of 350m³/h, 450m³/h and 550m³/h, allowing the fan’s performance to be selected according to the ventilation requirements of the system. At maximum speed, it delivers approximately 152.8l/s while maintaining a sound pressure level of 27dB(A) at three metres.

Technical Specification

Specification	Details
Manufacturer	Soler & Palau (S&P)
Model	TD-500/150-160 SILENT 3V
Manufacturer reference	5211302100
Fan type	Ultra-quiet in-line mixed-flow duct fan
Compatible duct diameter	150mm or 160mm
Standard spigot diameter	147mm
160mm connection	Additional rubber gasket supplied
Number of speeds	3
Maximum airflow – high speed	550m³/h / 152.8l/s
Maximum airflow – medium speed	450m³/h / 125l/s
Maximum airflow – low speed	350m³/h / 97.2l/s
Motor speed – high	2,480rpm
Motor speed – medium	2,060rpm
Motor speed – low	1,610rpm
Maximum absorbed power – high	59W
Maximum absorbed power – medium	50W
Maximum absorbed power – low	45W
Maximum absorbed current – high	0.26A
Maximum absorbed current – medium	0.22A
Maximum absorbed current – low	0.20A
Sound pressure level – high	27dB(A) at 3 metres
Sound pressure level – medium	22dB(A) at 3 metres
Sound pressure level – low	17dB(A) at 3 metres
Electrical supply	230V, single phase, 50Hz
Operating air temperature	−20°C to +60°C
Protection rating	IP44
Motor insulation class	Class B
Motor bearings	Ball bearings
Motor protection	Safety thermal overload protection
Casing material	Plastic with sound-absorbent insulation
Speed selection	Direct three-speed connection
Compatible switches	COM-3 and INTER 4P
Compatible speed controllers	RMB-1.5 and REB-1
Weight	6kg
Overall length	484mm
Maximum overall width	274mm
Main casing diameter	221mm
Connection box	Rotatable through 360°
Mounting	Suitable for wall or ceiling installation
Timer	No

The fan casing incorporates sound-absorbent insulation and a specially designed internal lining that directs sound waves towards the acoustic material. Rubber seals at the inlet and outlet help absorb vibration and provide an airtight connection with the adjoining ductwork.

For easier installation and servicing, the connection box can be rotated through 360°, while the motor-body assembly can be removed without disconnecting the ductwork. The fan is suitable for wall or ceiling mounting and can be connected to a compatible three-speed switch or voltage speed controller.

Frequently Asked Questions

What is an extractor fan used for?

An extractor fan removes humid, stale or polluted air from a room. They are commonly used in bathrooms, kitchens, utility rooms and other areas where moisture, odours or poor airflow can build up.
What extractor fan do I need for a bathroom?

The right bathroom extractor fan depends on the room size, installation location, duct route and control type required. Timer, humidity and low-carbon options are available depending on the project.
Can extractor fans help with condensation?

Yes, extractor fans can help reduce condensation by removing humid air from wet rooms. However, condensation can also be affected by insulation, heating, airflow and overall ventilation.
What is a D-MEV fan?

A D-MEV fan is a decentralised mechanical extract ventilation fan. It usually runs continuously at a low rate, with boost options when more extraction is needed.
What is the difference between an extractor fan and an inline fan?

A standard extractor fan is usually mounted on a wall, window or ceiling. An inline fan is installed within the duct run, often in a loft or ceiling void, and can be useful where a longer duct route is needed.

BPC Ventilation · Free project support

Not sure which ventilation system you need?

Send us your floor plans for a free ventilation estimate and residential layout guide. Our team will review your project and help you choose suitable MVHR or MEV equipment for your property and budget.

Free estimate & layout guide
Independent advice across brands
Lifetime technical support with every system sold

Send plans for a free estimate

Upload your drawings and project details to get started.

Free residential layout guides cover airflow requirements and unit and valve location guidance. Full ducting route planning is a separate service. Layout guides are not available for commercial projects.

BPC Ventilation · Complete system price promise

Got a quote? We’ll beat it.

Before you buy elsewhere, send us your complete MVHR or MEV system quote. We will beat it on a like-for-like basis, comparing the unit, ducting and required components together.

We will beat like-for-like complete system quotes
Unit, ducting & system components compared
Lifetime technical support with every system sold

Send your quote — we’ll beat it

Upload your complete system quote to get our better offer.

Our price promise applies to complete ventilation system supply quotes, including the unit, ducting and required components. We compare matching specifications and quantities, including VAT and delivery. Unit-only quotes are excluded.