ISO Sleeve Pipe Insulation

SKU : ISOSLEEVE082x10

Overview

The Isosleeve consists of an aluminium/polyester laminate outer jacket with a glass wool insulation layer. The Isosleeve comes standard with a plastic barrier. The barrier simplifies the mounting, and the installer will not have unnecessary contact with the glass wool fibres. The thermal insulation is suitable for preventing condensation and minimizing heat loss and loss of cold.

£30.77 GBP Excl. VAT: £25.64 GBP

For warranty information, please refer to the manufacturer’s warranty policy or contact them directly.

Any questions? Reach out to our team

View full details

Description

Products Best Used with

75mm Radial Pipework

90mm Radial Pipework

Part Numbers

82mm iso sleeve Pipe insulation x 10 meter - ISOSLEEVE082x10

102mm iso sleeve pipe insulation x 10 meter - ISOSLEEVE102x10

Specification

Temperature range -30°C to 140°C
Operating Pressure max +2000Pa
Diameter range 82mm-127mm
Length 10m

Construction

Barrier: Plastic Film
Glass wool blanket: 25mm, 16kg/m3
Outer Jacket: aluminium/polyester Laminate
Appearance Aluminium

Certification

Europe EN13501-1 B-s1,d0

Frequently Asked Questions

What is ductwork insulation used for?

Ductwork insulation is used to help protect ventilation ducting from heat loss and temperature changes. It can also help reduce the risk of condensation forming on suitable duct runs.
Where is ductwork insulation commonly installed?

Ductwork insulation is commonly used where ducting passes through colder or unheated areas, such as lofts, roof spaces, ceiling voids or other areas where temperature differences may occur.
Can ductwork insulation help reduce condensation?

Yes, ductwork insulation can help lower the risk of condensation forming on duct runs by reducing temperature differences. However, condensation can also be affected by airflow, installation quality and the surrounding environment.
What thickness of duct insulation is recommended?

The required insulation thickness depends on the duct location, air temperature and project requirements. The system design and applicable regulations should determine the correct specification.
Does insulating ductwork help reduce noise as well as heat loss?

Insulation primarily reduces heat transfer and condensation risk, but some insulation products may also provide a degree of acoustic benefit.

BPC Ventilation · Free project support

Not sure which ventilation system you need?

Send us your floor plans for a free ventilation estimate and residential layout guide. Our team will review your project and help you choose suitable MVHR or MEV equipment for your property and budget.

Free estimate & layout guide
Independent advice across brands
Lifetime technical support with every system sold

Send plans for a free estimate

Upload your drawings and project details to get started.

Free residential layout guides cover airflow requirements and unit and valve location guidance. Full ducting route planning is a separate service. Layout guides are not available for commercial projects.

BPC Ventilation · Complete system price promise

Got a quote? We’ll beat it.

Before you buy elsewhere, send us your complete MVHR or MEV system quote. We will beat it on a like-for-like basis, comparing the unit, ducting and required components together.

We will beat like-for-like complete system quotes
Unit, ducting & system components compared
Lifetime technical support with every system sold

Send your quote — we’ll beat it

Upload your complete system quote to get our better offer.

Our price promise applies to complete ventilation system supply quotes, including the unit, ducting and required components. We compare matching specifications and quantities, including VAT and delivery. Unit-only quotes are excluded.