QV VCD in-line spiral duct Shutoff Damper with Seal (AL)

SKU : QV-SDD100

Overview

This damper features EPDM gaskets at both flange connections and is designed to accommodate cladding with insulation up to 50 mm thick.

£9.78 GBP Excl. VAT: £8.15 GBP

For warranty information, please refer to the manufacturer’s warranty policy or contact them directly.

Any questions? Reach out to our team

View full details

Description

QV VCD in-line spiral duct Shutoff Damper with Seal (AL)

Product Part Number

100mm - QV-SDD100
125mm - QV-SDD125
150mm - QV-SDD150
200mm - QV-SDD200
250mm - QV-SDD250
300mm - QV-SDD300

Description

This damper features EPDM gaskets at both flange connections and is designed to accommodate cladding with insulation up to 50 mm thick.

It is a suitable option for ductwork systems where full airtightness is not required. The damper’s closing position is indicated on a control handle dial ranging from 0° to 90°, and the opening angle can be locked in place with a screw.

All standard DASL dampers are constructed from galvanized steel sheet.

Frequently Asked Questions

What is metal ductwork used for?

Metal ductwork is used to move air through a ventilation system. It can be used with MVHR, MEV, extractor fans and other ventilation installations where a strong and durable duct run is required.
What metal ductwork fittings are available?

Metal ductwork systems may use bends, couplings, reducers, adaptors, dampers, T pieces and other fittings depending on the duct route and installation requirements.
Can metal ductwork be used with MVHR systems?

Yes, metal ductwork can be used with some MVHR systems, depending on the design and installation requirements. The duct size and layout should match the ventilation design.
What is the difference between metal and PVC ductwork?

Metal ductwork is strong and durable, making it suitable for certain ventilation layouts and installations. PVC ductwork is lightweight and commonly used for domestic extractor fan and ventilation routes.