BSK Scholar 700 Classroom Heat Recovery Unit

BSK Scholar 700 Classroom Heat Recovery Unit

Part Number: Scholar 700

Highly efficient heat recovery unit specially designed for classrooms, meeting rooms and offices with C02 demand control operation

These units get rid of dust, pollen, spores and other harmful particles to provide 100% fresh filtered air and can either recover up to 95% of normally wasted heat or provide comfort cooling via the free cooling mode

BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems

Key features

• Fully automatic control
• Internal Co2 sensors
• Suitable for offices with up to 24 staff
• Airflow rate 700m3/h
• 160m pipe connections
• Up to 95% heat recovery efficiency.
• Free cooling mode via By-Pass
• Unit mounted digital controller
• Top or rear external pipe spigots
• 100% full and filtered modulating summer bypass
• Internal attenuating silencer
• Air quality pressure sensor
• Triple filter design of G4, G5 and F7 pollen filter
• Double walled construction with 25mm sound insulation
• Anti draft electronic dampers to prevent draft when off
• Filter warning
• BMS integration

Controllability

The BSK Scholar has a unit mounted controller with a passcode that will allow the authorised person to adjust all setting including

• Air flow settings
• temperature,
• Co2 levels
• Weekley programme
• Auto Mode

Internal Co2 Sensors

An internal mounted Co2 will boost the units speed when required

BMS Control

BMS integration is possible through the Modbus port on top of the unit

Boost Input

A boost input is positioned on top of the unit

Installation

Both the Scholar 500/700 can be positioned against an external wall or at an internal wall and ducted to the outside (This method will give a slight decrease in performance due to the longer duct pressure increase, as the units are designed to be used with a short duct run or no ducting.

Construction

The casing is double walled 0.7mm galvanised steel filled with 25mm of sound insulation in order to keep the sound and heat insulation at the highest level. The outside as well as the inside surfaces of our devices are painted with electrostatic powder paint and deliver a long life, while providing a stylish and clean appearance.

Motors

Highly efficient backward curved EC fans for maximum efficiency and performance

Filtration

A total of 3 filters are fitted as standard to supply superior filtration

• 1 x G4 filter to exhaust air to outside
• 1 x G4 pre filter to room air supply
• 1 x F7 post filter to room air supply

Summer By-Pass

The BSK Scholar range of units have a 100% summer by-Pass

Low Noise Levels

With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet

Heat Exchanger

The Highest performing heat recovery exchanger that can recover up to 95% of otherwise lost heat

Frost Protection

The unit has a frost protection programme

Silencer

The BSK Scholar as an internal silencer at the fresh air outlet of our device that allows silent

operation which provides a quiet working environment for classrooms or offices

Orientation

Only one orientation is possible

Construction

Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency

Mounting

The unit is floor mounted

Warranty

BSK offer a 2-year Parts warranty

Further Information

Further information is available on the Manufactures website (Click Here)