Description
Zehnder ComfoAir 200, left-handed CA200L
Zehnder ComfoAir 200, right-handed CA200R
Zehnder ComfoAir 200 Luxe with pre-heater, left-handed CA200LLUXEPH
Zehnder ComfoAir 200 Luxe with pre-heater, right-handed CA200RLUXEPH
The Zehnder ComfoAir 200 can be ceiling or wall mounted and suitable for properties up to 120m2
Available in two versions
- ComfoAir 200 – controlled by optional 3-speed switch
- ComfoAir 200 Luxe – controlled by optional digital controller or RF controllers
Sap Appendix Q listed with (A+) energy rating and is Passive house approved
BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems,
Key features- Zehnder ComfoAir 200
- Suitable for home sizes up to 120m2
- Airflow rate @100Pa - 285m3/h
- 93% heat recovery efficiency.
- 100% full and filtered modulating summer bypass.
- Left- or right-hand configuration
- BMS capability via RS232 protocol.
- RFZ wireless connectivity option.
- Passive house Approved
- 100% variable AUX speed for use as a way mode, medium speed or purge boost.
- BMS compatibility option.
- Volt free contact
- G4 filtration
- Tool free filter access.
- SAP Appendix Q listed
Controllability
The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation
Inputs
- Volt free contact boost capability.
- 240v switched live capability
Wall controllers (optional)
ComfoAir 200 controllers
Comfo Control Basic
- The Zehnder CCL is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate
Comfo Control Basic LED
- The Zehnder CCL is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system Maintenance notification
ComfoAir 200 Luxe controllers
Comfo Switch C67
- Led controller that allows you to adjust speed and view service alerts
Comfo Control RFZ
- 3 Speed wireless controller (will only operate with the use of the RF-PCB)
Comfo Control RFZT
- wireless timer controller of 10min to 90min (will only operate with the use of the RF-PCB)
RF-PCB
The Zehnder RF-PCB enables the CCRFZ (655 000 755) controller to be used with the ventilation system without the need for the Comfo Sense C67.
Room Sensors
12V 0-10V RH sensor
The Zehnder 12V 0-10V remote humidity sensor enables a signal to be sent to the ventilation system to control the corresponding flow rate.
12V 0-10V CO2 sensor
The Zehnder 12V 0-10V remote CO2 sensor and combined three position switch is designed to enable the user to manually select the desired ventilation systems flow rate based on the visual air quality indicator, or automatically adjust the unit relevant to the CO2 level.
Zehnder AQR
The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate.
Key Benefits
- Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane
- Adjustable overrun timer between 2-40 minutes
Zehnder PIRR
The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate.
Key Benefits
- Senses movement up to 7 m away
- Adjustable overrun timer between 2-40 minutes
Zehnder HHR
The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate.
Key Benefits
- Set humidity activation between 30-90% relative humidity
- Adjustable overrun timer between 2-40 minutes
Zehnder THR
The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate.
Key Benefits
- Set temperature activation between 5-35°C
- Fixed 2-minute overrun timer
BMS Control
BMS integration is possible
Installation
Wall bracket is included with unit
Construction
The Zehnder range are manufactured of EPP with plastic outer covers
Motors
Quality EC motors with 100% variable supply and extract motor control
Filtration
2 x G4 filters are fitted to the unit that are easy to replace
Summer By-Pass
The Zehnder range of units have a 100% summer by-Pass
Low Noise Levels
Heat Exchanger
A standard or optional Enthalpy heat exchanger is available
Frost Protection
The unit has a frost protection programme
Orientation
This unit has Left- or right-hand configuration and please check before ordering
Warranty
Zehnder offer a 2-year warranty but can be extended to 6 years by registerable through Zehnder Website within 6 months of purchase (Homeowner registration | Zehnder Group UK)
Approvals
The Zender range units are SAP appendix Q listed
This unit is passive house approved
Accessories
Further Information
Further information is available on the Manufactures website (Click Here)
