Nuaire ceiling void unit - ECO-LP2
Nuaire ceiling void unit Opposite hand - ECO-LP2-OH
Description
The new MRXBOXAB-ECO-LP2 is a Low-Profile ceiling mounted unit that is specifically
designed to fit easily into apartments with ceiling void restrictions of only 200mm and has a high performance of 285m3/hr with low SFP of 0.56 wls
Controllability is provided by optional room sensors or switches
(no digital controller is available for this model)
The Nuaire MRXBOX range has been in continual improvement and production in the UK for over 15 years providing a high performance, wall-mounted MVHR unit which is specifically designed to provide a reliable but simple to operate system for social housing, developments and end users
BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems,
KEY FEATURES – Nuaire AB-ECO-LP2
- Suitable for floor areas up to 170m2
- Delivers an airflow rate of up to 285 m³/hour @ 100 Pa
- High heat recovery efficiency of up to 79%.
- 100% summer by-pass
- On demand control via optional room or duct sensor options
- Full 100% automatic summer bypass to supply unheated air in the summer
- Sap Appendix Q (BRE) approved
- 2 x G3 filters
- Galvanised steel casing with EPP internal lining
- 5-year warranty* (Listed parts Only)
- 'A' energy rating
- Left hand right oriented models available
- UK/CA marked
- Surge protected
Filtration
2 x G3 filters are fitted to the unit that are easy and inexpensive to replace
(The filters are provided with plastic covers that should be removed before starting unit for first time)
CONTROL OPTIONS
The Nuaire MRXBOX units are controlled by one of the following:
- Manual 100% adjustment of background and boost speeds
- 4 x adjustable switches on the front of the unit
- Manual control Via optional 3 speed manual switch
- Additional external sensors achieving on-demand ventilation
- Switched live signal from light/remote switches
Heat Exchanger
This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side
The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit
Frost Protection
In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed.
Frost protection will only activate after ten days of continuous run time.
Summer By-Pass
The Nuaire AB units have a 100% summer by-Pass
If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature
Orientation
The Nuaire units can be right or left-handed and correct orientation should be checked before purchase
Construction
Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency
