Female Duct Metal Connector
Product Part Number
100mm Duct Connector - C100FM
125mm Duct Connector - C125FM
150mm Duct Connector - C150FM
160mm Duct Connector - C160FM
180mm Duct Connector - C180FM
200mm Duct Connector - C200FM
Description
These connectors are constructed of high quality durable galvanised metal
Female duct metal connectors are designed to join two male duct fittings together
Manufactured in the UK, made without seals
Designed for use with safe seal galvanised metal ducting but it can be used with equivalent standard metal ducting or some plastic ducting ranges
Perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans
Can be used to connect long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems.
Compatibility
Compatible with most other lead manufacturers for galvanised metal ducting
Performance
Solid rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations.
Installation
To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape
- Apply duct sealant to the male fitting
- Push together
- Apply aluminium duct sealing tape over joint
Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled
Insulation of Ductwork
It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less.
This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space.
If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool
It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations
Available Sizes
- 100mm
- 125mm
- 150mm
- 160mm
- 180mm
- 200mm