Description
Airflow Adroit DV110
R- 90001267 / R-EPH- 90001267EPH
L- 90001268 / L-EPH – 90001268EPH
The Airflow Adroit DV110 is a high-Quality Passive house approved unit suitable for houses of up to 220m2 that is built to the highest standards that include internal Co2 and Humidity sensors plus triple filter filtration
Control with this unit via either a smartphone, tablet, or PC, Automatic Demand control via the internal sensors or the optional use of a wall mounted controller or integrate into a home automation or BMS system via the KNX or Modbus connections
BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems,
KEY FEATURES – Airflow Adroit DV110
- Suitable for floor areas up to 220m2
- Delivers an airflow rate of up to 370 m³/hour @ 100 Pa
- High heat recovery efficiency of up to 91%.
- Internet control Via Smartphone App or PC
- Internal humidity sensor for automatic speed control
- Internal Co2 Sensor for automatic speed control
- Optional wall controller
- On demand control via room or duct sensor options
- BMS connection via MODBUS or KNX (optional)
- Full 100% automatic summer bypass to supply unheated air in the summer
- Sap Appendix Q (BRE) approved
- Passive House Approved
- Triple filter design with 2 x G4 & 1 x F7 pollen filter
- Galvanised steel, double-skin casing with 20 mm insulation
- Optional smart frost protection
- 5-year warranty* (Listed parts Only)
- 'A' energy rating
- Triple filter design with 2 x G4 & 1 x F7 pollen filter
- Galvanised steel, double-skin casing with 20 mm insulation
- Optional LCD digital controller with four independent environmental profiles
- Optional VOC (Volatile Organic Compounds) sensor
- Auto cut-out switch for extra safety
- Optional built-in electric post-heater
- Complies with the NHBC criteria and ERP 2016 standards
Integral Humidity and Co2 Sensor
The Adroit Unit have internal humidity and Co2 sensors that can provide a superior demand-controlled ventilation solution for your property
This is possible, as due to changes to humidity and CO2 levels that occur through changes in occupancy or usage, the ventilation will boost or reduce to match demand, without the need of manual intervention.
Total filtration
Filtration is very important and the Airflow adroit has a unique and highly effective triple filter design containing two ISO Coarse>75% (G4) grade filters and one ISO ePM1 (F7) filter on the supply and extract air flow path to create an ultra-hygienic environment.
This filtration system improves the air quality and provides additional air filtration by preventing particles as small as pollen from entering the premises. This is of particular benefit to those that suffer from asthma or hay fever and other respiratory conditions, this unit also complies to the latest regulations of ISO 16890
CONTROL OPTIONS
The DV110 Adroit unit shall be controlled by one of the following:
- Wall mounted 4 speed manual controllers
- Adroit digital controller
- Adroit Cloud through the Internet or local network using laptop, smartphone, tablet, etc.
- BMS via LON or KNX through a PC or a central control system
- On-demand ventilation through built-in humidity and CO2 sensors
- Additional external sensors achieving on-demand ventilation
- Switched live signal from light/remote switches
Optional ADROIT DIGITAL CONTROLLER
The optional digital controller provides significant information to the user regarding the performance of their Adroit system including adjusting the ventilation levels, filter maintenance, separate fan control, faults in the system and commissioning the system and intuitive end user functions
The DV110 Adroit is controlled via 4 ventilation profiles controls providing the following features:
- 4 ventilation profiles,100% adjustable
- Internet connection available
- Automatic boost function with delay timer
- Filter maintenance reminder via counter clock (standard)
- Heater control for optional post-heater
- Connection to BMS via LON or KNX
- Self-diagnostic via fault signal relay
- On-demand control via humidity, CO2 and VOC sensors
- Separate fan control for ease of commissioning
- Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days
- Indoor temperature control based on extract air temperature or supply air temperature
Heat Exchanger
This unit has a high-quality PVC counterflow heat exchanger with a 90% thermal efficiency protected with high-capacity filters on each side
The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit
High performance Motors
The Airflow Adroit units have high performance, low energy consumption EC fans with backward curved impellers design providing a quiet operation and achieving low specific fan power values.
The fans are easy to remove allowing easy maintenance and repair
Frost Protection
The standard unit has a traditional frost protection method, the outdoor air is pre-heated before passing through the heat exchanger. This way the unit could still provide balanced ventilation even when the frost protection was on. However, the electric heater kicks in intermittently hence consumes more energy than needed.
The EPH model with heater has a new Smart Frost Protection method that works in a more energy efficient manner which constantly monitors the heat exchanger conditions and uses the frost heater only when necessary. This significantly reduces the energy consumption and provides more heat recovery throughout the winter season.
If located in a very cold climate or if Passive house approval is required, we recommend the EPH model with a supply air heater (0.9 kW), which comes built-in as standard with the Adroit EPH unit models to prevent the heat exchanger from getting damaged by frost during extreme winter temperatures (-15C).
Summer By-Pass
Safety Switch
The unit shall have a dead man's switch preventing the fans from still running, which will enable the filters to be changed and maintained,
Orientation
The Adroit DV110 can be right or left-handed and correct orientation should be checked before purchase
Construction
Manufactured of Insulated twin wall powder coated galvanised steel to provide optimum thermal and
acoustic performance with a hygienic easy to clean surface that will last a lifetime
Certification
- The DV110 Adroit meets requirements set out by the Energy Related Products (ErP) Directive 2016,
- achieving an A rating. You can find out more about the ErP Directive at: www.airflow.com
- The DV110 was tested and has achieved Passive House Approval by the Passive House Institute when equipped with the optional Electric Post-heater.
- *Complies with ISO 16890
- listed on the SAP Appendix Q Database PCDB
